FREE 2-DAY SHIPPING ON ORDERS $200+

Blog

Peptide Syringe Units Chart: Convert mg and mcg to U-100 Units

A long open shelf of clear laboratory glassware, volumetric flasks and graduated cylinders, catching side light from a window in a bright lab

A peptide dose is written in milligrams or micrograms, and an insulin syringe is marked in units. Neither one says how to get from the first to the second, because the bridge between them is the vial: how much powder is in it, and how much water went in after.

A unit is a measure of liquid, one hundredth of a millilitre, and it carries whatever the mix puts in it. Twenty units from a 10mg vial given 1mL of water holds 2mg. The same twenty units from that vial given 2mL holds 1mg, half the dose at the same line on the barrel.

Simms Research lists the water for every vial it sells in How to Reconstitute Peptides, and its peptide calculator handles any other mix. The charts below are the general version, built for a vial from any shop: the strength comes off the vial-and-water chart, the units off the dose charts after it.

Insulin syringe units to mL

0.01mL per unit. U-100 means 100 units to the millilitre, so going from units to millilitres is a two-place shift of the decimal point, the same for every peptide and every barrel size: 1 unit is 0.01mL, 10 units 0.1mL, 25 units 0.25mL, 75 units 0.75mL and 100 units 1mL.

The 30, 50 and 100 lines are also where the three common barrels end. Which barrel suits which dose is its own question, answered in What Size Syringe for Peptides? Insulin Syringes, Needles and Units Explained.

How many units is 0.5mL on an insulin syringe?

Fifty: the halfway line on a 1mL syringe, or all of a 0.5mL one. A quarter of a millilitre is 25 units and a tenth is 10.

How many units is 2mL of bac water?

200, which is two full 1mL syringes. 3mL is 300 units, and a whole 10mL vial is 1,000. Mixing water is measured on the same scale as the doses drawn later, so one box of U-100 syringes covers both jobs. Simms Research’s Research Water, bacteriostatic water with 0.9% benzyl alcohol, is $20 for 10mL.

What is 5 units on an insulin syringe?

0.05mL, a twentieth of a millilitre. What it carries depends on the mix: 500mcg from a 10mg vial given 1mL of water, 250mcg from the same vial given 2mL, and 125mcg given 4mL.

An empty bright lab seen along a long white bench toward tall windows, with a small vial of white peptide powder beside a larger vial of clear water

Peptide syringe units chart by vial size and water

Strength is the milligrams in the vial divided by the millilitres of water, and every chart on this page runs on it. For the vial sizes and water amounts research peptides are usually mixed with, in milligrams per mL:

VialWith 1mLWith 2mLWith 2.5mLWith 3mLWith 5mL
5mg52.521.671
10mg10543.332
15mg157.5653
20mg201086.674
30mg301512106
60mg6030242012

More water makes a weaker mix and more units for the same dose, while the peptide in the vial stays exactly the same. Thirds, such as 10mg in 3mL, are rounded here; the calculator keeps them exact.

One shortcut carries the rest of the page: at a strength of S milligrams per mL, each milligram takes 100 divided by S units. That is 10 units per milligram at 10mg per mL, 20 at 5mg, 40 at 2.5mg and 5 at 20mg. Everything else is that number multiplied by the dose.

Polished stainless steel calibration weights of graduated sizes in a shallow white tray with flat-tipped forceps on a white bench in daylight

Peptide mg to units chart

Strength along the top, dose down the side. Each cell multiplies the dose in milligrams by 100 and divides by the strength, giving U-100 units:

Dose2.5mg per mL5mg per mL10mg per mL20mg per mL
250mcg1052.51.25
500mcg201052.5
1mg4020105
2mg80402010
2.5mg100502512.5
4mg160804020
5mg2001005025
7.5mg3001507537.5
10mg40020010050
12mg48024012060
15mg60030015075

A figure above 100 needs more than one full 1mL syringe, the usual sign of a mix too weak for that dose; a stronger mix brings it back under one draw. A figure ending in .5 needs a barrel marked in half units, which most aren’t, and here the fix runs the other way: at 20mg per mL, 2.5mg is 12.5 units, while at 10mg per mL the same 2.5mg is a whole 25.

How many units is 1mg on an insulin syringe?

It has no single answer until the strength is known. A 10mg per mL mix puts 1mg on the 10 line, a 5mg mix on 20, a 2.5mg mix on 40 and a 20mg mix on 5. A milligram is a weight and a unit is a volume, so the mix decides how they line up.

How many units is 2mg or 2.5mg on an insulin syringe?

From a 10mg per mL mix, 2mg is 20 units and 2.5mg is 25. From a 5mg per mL mix they double to 40 and 50, and from a 2.5mg per mL mix, 2.5mg fills a whole 1mL syringe.

Peptide mcg to units chart

1,000mcg is 1mg, so microgram doses run on the same arithmetic with the decimal point moved three places. Small doses are usually drawn from weaker mixes, so this chart starts lower:

Dose1mg per mL2mg per mL2.5mg per mL5mg per mL
50mcg52.521
100mcg10542
200mcg201084
250mcg2512.5105
300mcg3015126
500mcg50252010
750mcg7537.53015
1,000mcg100504020

5mg per mL is what 2mL of water makes of a 10mg vial, the most common mix of all. Each unit there carries 50mcg, and small doses get very small: 100mcg is 2 units. A weaker mix spreads them out, so 100mcg from the same vial given 5mL of water is 5 units.

How many units is 250mcg on an insulin syringe?

In the common 5mg per mL mix it is 5 units. Weaker mixes put it higher on the barrel: 10 at 2.5mg per mL, 12.5 at 2mg, 25 at 1mg. 250mcg is a quarter of a milligram, so it always takes a quarter of the units a full milligram would.

How many units is 100, 200 or 300mcg?

At 5mg per mL they are 2, 4 and 6 units. At 2.5mg per mL they double to 4, 8 and 12, and at 1mg per mL, a 5mg vial in 5mL, they reach 10, 20 and 30.

Insulin syringe units to mg

The reverse runs from the line on the barrel back to the dose: units divided by 100 gives millilitres, and millilitres times the strength gives milligrams. It answers the other half of the question, how much is actually in 20 units:

Units2.5mg per mL5mg per mL10mg per mL20mg per mL
5125mcg250mcg500mcg1mg
10250mcg500mcg1mg2mg
15375mcg750mcg1.5mg3mg
20500mcg1mg2mg4mg
25625mcg1.25mg2.5mg5mg
30750mcg1.5mg3mg6mg
401mg2mg4mg8mg
501.25mg2.5mg5mg10mg
601.5mg3mg6mg12mg
1002.5mg5mg10mg20mg

The same figures count the doses in a vial: the whole mix in units divided by the dose in units. A 10mg vial given 2mL is 200 units of liquid, so a 10-unit dose comes out of it 20 times.

Peptide dosage in units on a syringe, by compound

The compound doesn’t set the units; the water does. Two vials of the same 10mg BPC-157 can need 5 units and 10 units for the same 250mcg, because one was mixed with 2mL and the other with 4mL. A units figure for any compound means something only next to its strength.

Each Simms Research dosage guide converts its own doses at the water that guide uses, and the way a compound’s doses are written decides which chart above to read. Retatrutide, tirzepatide, tesamorelin, TB-500, GHK-Cu and NAD+ are dosed in milligrams, so they read off the mg chart. BPC-157, KPV, ipamorelin and the CJC-1295 / ipamorelin blend are dosed in micrograms and read off the mcg chart, and MOTS-c uses both. Each has its own chart in its guide, such as the tirzepatide dosage chart and the BPC-157 dosage chart.

Blends carry more than one peptide in every unit. A 20mg vial made of two peptides at 10mg each, such as the Wolverine Peptide Stack, is 5mg per mL of each once mixed with 2mL, so 10 units carries 500mcg of both rather than 1mg of either. The charts work on one peptide’s share of the vial, never the total on the label.

How many units is 2.5mg of tirzepatide?

A 20mg vial mixed with 2mL comes to 10mg per mL, where 2.5mg sits on the 25 line. A 10mg vial with the same 2mL is half as strong, so the same dose takes 50. The tirzepatide calculator has every vial size preset.

Retatrutide dosing in units on a syringe

A mix of 10mg per mL puts 2mg on the 20 line, and a 20mg per mL mix puts it on 10. The same 10mg vial given 2mL instead of 1mL doubles it to 40. The retatrutide calculator covers each vial size, and the retatrutide dosage chart lays the doses out week by week.

A small clear vial with a white freeze-dried peptide cake and a grey stopper, backlit by a bright window, with a second vial blurred behind it

Label milligrams and measured milligrams

Every chart above assumes the vial holds exactly what its label says. Every Simms Research batch tested on July 16, 2026 by an independent ISO-certified lab came in above it, three vials averaged per compound, so each unit drawn by the label math carried a little more. The 10mg vials named on this page ran from 10.19mg for BPC-157, 1.9% more in every unit, to 11.11mg for tesamorelin, 11.1% more, with tirzepatide at 10.57mg and retatrutide at 10.68mg in between.

On a 500mcg draw that is 10 to 56mcg extra, about one unit at most at 5mg per mL. For amounts matched to the batch, the measured figure goes into the calculator’s vial field in place of the label, and the units it returns follow. Each certificate, with its net content line, sits on Simms Research’s lab results pages.

Frequently asked questions

Is a unit on a syringe the same as an IU?

No. An international unit on a growth hormone or hCG label measures biological activity and is defined separately for each substance. A syringe unit is 0.01mL of liquid, whatever is dissolved in it.

Do the charts work for a peptide pen?

Yes. The Simms Research Peptide Injection Pen, $97, dials in single units of 0.01mL, so 10 units on any chart here is 10 clicks on its knob. Filling and priming are covered in How to Use a Peptide Injection Pen: Load, Prime and Set the Units.

Do these charts work on a U-40 syringe?

No. A U-40 barrel fits 40 units into a millilitre, so each of its units is 0.025mL and every figure here reads wrong on it. The syringe guide linked in the first section explains how to tell them apart.

Is Simms Research legit?

Its claims can be checked. The measured contents in the last chart come from its public certificates, one page per compound. Orders in before the 5 PM Eastern cutoff ship from Florida the same business day, and its Free Delivery Guarantee covers a parcel that goes missing or arrives damaged. Support takes calls at 855-592-8507 on weekdays, 9 to 5 Eastern.

Is there a discount code on this page?

No code, and no commission on any link. Every price named is Simms Research’s everyday price.

Keep exploring

Verify the underlying batch data

Compare published methods and results, then open the source certificate for the batch you are evaluating.

Browse lab results