Blog
The Essential Wolverine Stack Dosage Chart and Calculator: BPC-157 + TB-500
Wolverine stack dosage for the pre-mixed 20mg vial is 250 to 500mcg of each peptide a day, which is 5 to 10 units on a U-100 insulin syringe when the vial is mixed with 2mL of water. The stack pairs BPC-157 and TB-500, two peptides normally dosed on different schedules, so this guide covers why they are combined, how the classic two-vial schedule compares with one pre-mixed vial, the mixing, timing and common errors, and what Simms Research’s certificates show is actually in the Wolverine Peptide Stack.
Wolverine Stack Dosage Calculator
Pick the water and the BPC-157 dose, and the calculator gives the units to draw on a U-100 insulin syringe; TB-500 comes along at the same amount. It opens on the 10mg of BPC-157 in the 20mg vial, with 2mL and a 500mcg dose: 10 units.
Wolverine Stack Dosage Chart
Research protocols for the pre-mixed vial draw 250 to 500mcg of each peptide a day, 0.5 to 1mg of blend in total, and some go as high as 1mg of each. With a 1:1 ratio every draw holds the same amount of both. The chart gives each draw in units on a U-100 insulin syringe for the two cleanest mixes of the 20mg vial:
| BPC-157 and TB-500 per draw | Total blend | 20mg vial with 2mL | 20mg vial with 4mL | Each peptide per week, daily |
|---|---|---|---|---|
| 250mcg each | 0.5mg | 5 units (0.05mL) | 10 units (0.10mL) | 1.75mg |
| 500mcg each | 1mg | 10 units (0.10mL) | 20 units (0.20mL) | 3.5mg |
| 750mcg each | 1.5mg | 15 units (0.15mL) | 30 units (0.30mL) | 5.25mg |
| 1mg each | 2mg | 20 units (0.20mL) | 40 units (0.40mL) | 7mg |
The 2mL mix reads in fives: every 5 units is 250mcg of each peptide. The 4mL mix doubles every count, which turns the 250mcg draw into a clean 10 units instead of a hard-to-read 5, and a 500mcg draw still fits a 0.3mL syringe.
Why the Wolverine Stack Combines BPC-157 and TB-500
The Wolverine stack is BPC-157 and TB-500 used together. BPC-157 is a 15-amino-acid peptide taken from a protein in human gastric juice. TB-500 is a seven-amino-acid peptide copied from the stretch of thymosin beta-4 that binds actin, the protein cells use to move and rebuild. The name borrows the comic-book character’s fast healing, and it stuck because these are the two most studied peptides in tissue-repair research.
The two work from different directions. BPC-157 acts on the nitric oxide system, growth-factor receptors and new blood vessel growth. TB-500 binds actin, the protein cells use to move and rebuild, and drives cell migration into damaged tissue. Paired, they cover more of the repair process than either covers alone, which is why tendon, ligament and muscle protocols so often run them together.
The stack comes two ways: two separate vials on their own schedules, or one pre-mixed vial. Simms Research sells the pre-mixed version, the Wolverine Peptide Stack, as 10mg of BPC-157 and 10mg of TB-500 in one 20mg vial, and sells BPC-157 and TB-500 on their own as well.
How Wolverine Stack Dosage Works
The two peptides last different lengths of time in the body, and that sets their schedules. BPC-157 is short-lived, so protocols give it every day, sometimes twice. TB-500 is dosed in milligrams and, in the classic schedule, front-loaded: more often for the first four to six weeks, then less often to maintain.
A short half-life explains the daily rhythm. A 2022 pharmacokinetic study in rats and beagle dogs measured a half-life under 30 minutes, with BPC-157 broken down into its amino acids, and found 14–19% of an intramuscular dose reaching the blood in rats against 45–51% in dogs.
Common Wolverine Stack Dosage Patterns
The classic Wolverine protocol runs the two peptides from separate vials: BPC-157 at 250 to 500mcg once or twice a day, and TB-500 at 2 to 2.5mg twice a week for the first four to six weeks, a loading phase, then once a week. A pre-mixed vial can’t split them that way. Whatever amount of BPC-157 a draw holds, it holds the same amount of TB-500, on the same days. The weekly totals are where the two approaches line up. On separate vials, BPC-157 runs 1.75 to 3.5mg a week (250 to 500mcg daily), and TB-500 runs 4 to 5mg while loading (2 to 2.5mg twice a week) and 2 to 2.5mg on maintenance (once a week). From the Wolverine vial, each peptide comes to 1.75mg a week at 250mcg daily, 2.5mg at 500mcg five days a week, 3.5mg at 500mcg daily and 5.25mg at 750mcg daily.
Those two-vial figures carry an assumption of their own: that 2mg of TB-500 means the same amount of peptide wherever the number is quoted. It doesn’t.
Side by side, the common patterns look like this:
| Pattern | BPC-157 | TB-500 | How long |
|---|---|---|---|
| Two vials, loading | 250 to 500mcg, once or twice daily | 2 to 2.5mg twice a week | First 4 to 6 weeks |
| Two vials, maintenance | 250 to 500mcg daily | 2 to 2.5mg once a week | Rest of the block |
| Pre-mixed 20mg vial | 250 to 500mcg daily | Same as BPC-157, daily | 6 to 12 weeks |
| BPC-157 alone | 250 to 500mcg, once or twice daily | None | 4 to 12 weeks |
The Pre-Mixed Vial Instead of Two Vials
A pre-mixed vial trades flexibility for simplicity: one vial to mix, one draw a day, one schedule. The cost is that the ratio is fixed, so BPC-157 and TB-500 can’t be raised or lowered separately. For a protocol that wants roughly equal daily amounts of both, that’s an easy trade; for one that wants a heavy TB-500 loading phase, separate vials still do it better.
Simms Research carries the same 10mg of BPC-157 and 10mg of TB-500 in three vials. Glow Peptide Blend adds 50mg of GHK-Cu, and Klow Peptide Blend adds 50mg of GHK-Cu and 10mg of KPV. The difference is which peptide sets the dose. A 500mcg BPC-157 draw from Wolverine also holds 500mcg of TB-500. From Glow it also holds 500mcg of TB-500 and 2.5mg of GHK-Cu, and from Klow it adds 500mcg of KPV to those.
In Glow and Klow the dose is set by GHK-Cu, which research protocols keep at 1 to 2mg a day, so BPC-157 and TB-500 top out at 400mcg each per draw. The Wolverine vial has no third peptide to cap it. The GHK-Cu dosage guide covers the Glow and Klow unit math.
How Much Bacteriostatic Water for a 20mg Wolverine Vial
Water sets the strength and nothing else; the vial holds the same 20mg whatever goes in. In a 1:1 vial each peptide is half of that, so 2mL makes 5mg per mL of BPC-157 and 5mg per mL of TB-500. A U-100 syringe marks 100 units to the milliliter: divide the milligrams wanted by the strength and move the decimal two places, so 0.5mg at 5mg per mL is 0.1mL, or 10 units.
A 10mg vial with half the water has exactly the strength of the 20mg vial, so the unit counts carry over and the 20mg vial simply holds twice the draws. Other vial sizes and water volumes follow the same steps, and the Simms Research peptide calculator converts any of them.

The powder is white and dissolves clear and colorless. Let the water slide down the glass wall instead of landing on the cake, then roll the vial gently until no flecks remain; shaking isn’t needed. Once mixed, the vial lives in the refrigerator, 36–46°F (2–8°C). One 10mL vial of Simms Research bacteriostatic water covers five 2mL mixes or two 4mL mixes, and Do Peptides Need to Be Refrigerated? sets out how the powder and the mixed vial should each be kept.
Timing, Duration and Protocol Design
Research protocols run the Wolverine vial once a day, five to seven days a week, sometimes split into two draws. Nothing in either peptide ties the dose to food or a time of day, so the choice between morning and evening is simply whichever time can be kept every day.
How Long a 20mg Wolverine Vial Lasts
Once water goes in, the vial keeps 28 days in the refrigerator. How much of that window a 20mg vial fills depends on the draw and how often it is taken. At 250mcg of each it covers 40 days once a day, 56 days five days a week and 20 days twice a day. At 500mcg it covers 20, 28 and 10 days; at 750mcg, 13, about 19 and about 7; and at 1mg, 10, 14 and 5.
500mcg of each, five days a week, empties the vial in exactly 28 days, one vial per four-week block, which matches the 28 days a mixed vial keeps in the fridge. The 250mcg daily draw outlasts that window, so a vial mixed for it still has about 12 days of blend left when its 28 days are up.

Which TB-500 Is in the Vial
TB-500 is not thymosin beta-4. Thymosin beta-4 is a 43-amino-acid protein found in almost every human cell, with a molecular weight of 4,963. TB-500 is seven of those amino acids, Leu-Lys-Lys-Thr-Glu-Thr-Gln, positions 17 to 23, made synthetically with an acetyl group on the front, and it weighs 889. The Hong Kong Jockey Club’s racing laboratory, which built the drug test for it in horses, described the veterinary product the same way: its key ingredient is N-acetylated LKKTETQ, and one horse dose held 10mg.
The mass spectrometry on Simms Research’s Wolverine certificates shows which one is in their vial. TB-500 appears at 445.10 as a doubly charged ion, a molecular mass of about 888: the seven-amino-acid peptide. Full-length thymosin beta-4 would appear near 4,963. Weight for weight, the two are very different amounts of molecule. TB-500 is 7 amino acids with a molecular weight of 889.0; thymosin beta-4 is 43 amino acids at 4,963, and each carries one actin-binding site. A milligram holds 1,125 nanomoles of TB-500 and 201 of thymosin beta-4, so 0.45mg of TB-500 has the same molecule count as 2.5mg of thymosin beta-4. TB-500 has no published human trials; thymosin beta-4 has an intravenous Phase 1 trial at up to 1,260mg a day and topical Phase 2 trials.
By molecule count, 1mg of TB-500 equals about 5.6mg of thymosin beta-4. Each carries one actin-binding site, and in a 2003 National Institutes of Health study the seven-amino-acid peptide on its own promoted wound repair in aged mice comparably to the full protein.
No published study sets the 2 to 2.5mg twice-weekly figure for either molecule. If it traces back to full thymosin beta-4, the same number of molecules of TB-500 weighs 0.45mg, less than a single 500mcg draw from the Wolverine vial. Every Wolverine figure in this guide is the seven-amino-acid peptide, weighed as it sits in the vial.
What the Wolverine Certificates Measured
Every unit count above assumes the vial holds exactly what the label says, in exactly a 1:1 split. Simms Research’s published Wolverine certificates cover two batches of their earlier 10mg vial, 5mg of each peptide, and each reports the two peptides separately. The April 14, 2026 batch measured 7.08mg of BPC-157 and 5.11mg of TB-500 at 99.71% purity, so a 500mcg-each draw really held 708mcg and 511mcg. The January 19, 2026 batch measured 6.94mg and 4.78mg at 99.91%, or 694mcg and 478mcg per draw.
TB-500 measured within 5% of its 5mg label in both batches. BPC-157 ran 39% and 42% over, so the real ratio in those vials was about 1.4 to 1, and a draw worked out from the label held the TB-500 it was meant to plus about 40% more BPC-157. The same correction works on any certificate: take each peptide’s measured milligrams, divide by the milliliters of water, and use that strength for its units.
Localized Versus Body-Wide Use
Injection site is the other recurring question. Some protocols place BPC-157 under the skin close to the injury. The rat studies behind it didn’t: they injected into the abdominal cavity, away from the transected muscle, and the muscle still healed (Staresinic, Journal of Orthopaedic Research, 2006). A standard subcutaneous site, such as the abdomen, takes both peptides into circulation.
Many protocols end up as a hybrid: BPC-157 close to the injury, where its blood-vessel effects are local, and TB-500 anywhere under the skin, because its cell-migration effect travels. A pre-mixed vial can’t split them that way, so one-vial protocols simply pick one site, usually near the injury or in the belly.
Common Wolverine Stack Dosing Errors
The first is mixing up units and milliliters. BPC-157 is dosed in micrograms and TB-500, on the two-vial schedule, in milligrams, so a habit carried from one vial to the other can be off by a factor of ten. On a U-100 syringe, 10 units is 0.1mL; the chart above gives both.
The second is assuming a 2mg TB-500 figure means the same thing everywhere. As the section above explains, the seven-amino-acid TB-500 and full thymosin beta-4 differ in weight more than fivefold for the same number of molecules.
The third is trusting the label over the certificate. In Simms Research’s earlier Wolverine batches, BPC-157 measured about 40 percent over its label while TB-500 sat on target, so a draw held more BPC-157 than the chart says. Typing the measured milligrams from the certificate into the calculator fixes it, and every certificate is on the Wolverine lab results page.
The last is cutting a block short. Protocols run six to twelve weeks, and the rat studies behind BPC-157 ran two to six; stopping after a week or two leaves the question the protocol was meant to answer unanswered.
Wolverine Stack vs BPC-157 or TB-500 Alone
Run alone, each peptide keeps its usual schedule: BPC-157 daily at 250 to 500mcg, covered in the BPC-157 dosage chart, and TB-500 in milligrams on its own days, covered in the TB-500 dosage chart. A single peptide makes it easier to tell what did what. The stack makes sense when the protocol wants both repair pathways at once, and the one human report that used both together gave them in a single injection into the knee, with 3 of 4 patients reporting improvement ( Lee, Alternative Therapies in Health and Medicine, 2021 ).
Frequently Asked Questions
Is the Wolverine stack taken daily or weekly?
From one pre-mixed vial, daily, five to seven days a week. The twice-weekly and weekly TB-500 schedule belongs to protocols that run TB-500 from its own vial.
How many units of Wolverine is 500mcg?
10 units in a 20mg vial mixed with 2mL of water, or 20 units with 4mL. Either draw holds 500mcg of BPC-157 and 500mcg of TB-500.
How much bac water does a 20mg Wolverine vial need?
2mL for 5mg per mL of each peptide, where every 5 units is 250mcg of each. 4mL halves the strength and doubles every unit count, which makes small draws easier to measure.
How long does a 20mg Wolverine vial last?
20 days at 500mcg of each daily, 28 days at that amount five days a week, and 40 days at 250mcg of each daily, which runs past the 28 days a mixed vial keeps.
What is the difference between a 10mg and a 20mg Wolverine vial?
Only the amount. Both are 1:1. A 10mg vial with 1mL of water has the same strength as a 20mg vial with 2mL, and the 20mg vial holds twice as many draws.
Do BPC-157 and TB-500 need to be taken at the same time?
From a pre-mixed vial they always are, in one draw. On the two-vial schedule they don’t have to be: BPC-157 goes daily and TB-500 on its loading or maintenance days, and on days with both they can go in separately.
Is TB-500 the same as thymosin beta-4?
No. TB-500 is the seven-amino-acid actin-binding stretch of thymosin beta-4, with a molecular weight of 889 against 4,963. By molecule count, 1mg of TB-500 equals about 5.6mg of thymosin beta-4.